Promat SYSTEMPANEL™

General Description
Promat SYSTEMPANEL™ is Promat’s newest matrix technology of binding organic materials and inorganic minerals within a calculated mineral matrix to form a monolithic core. Producing Cement Bound Matrix is very economical on energy. It does not require high temperatures for curing or drying. In addition, at least 25% of the composition is recycled waste. This is truly an environmentally friendly board leaving little carbon footprints, and does not emit or produce green house gases.

Promat SYSTEMPANEL™ is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age or moisture.

It is recommended that panels are stored flat and in dry conditions and protected from water once installed. However if panels get wet or saturated they must be handled with care and allowed to dry out before being fully enclosed.

A health and safety data sheet is available from the Promat and, as with any other materials should be read before working with the board. The board is not classified as a dangerous substance so no special provisions are required regarding the transportation and the disposal of the product to landfill. They can be placed in onsite rubbish skips with other general building waste which should then be disposed by a registered contractor in the appropriate and approved manner.