PROMASEAL^® Bulkhead Sealer System

General Description
PROMASEAL^® Bulkhead Sealer System (SB) is made from high density rock fibre panels (nominal 50mm thick) coated with PROMASEAL^® Bulkhead Sealer. The system will act as a fire barrier to seal off openings in walls or floors thus preventing the passage of fire. It is the simplest of all fire stopping products to install and also one of, if not the most economical products to install.

In many buildings, cables such as computer and telecommunication cables are continuously added, removed or replaced. PROMASEAL^® Bulkhead Sealer System enables this process to be carried out with the minimum of inconvenience.

PROMASEAL^® Bulkhead Sealer System has been successfully tested in wall and floor constructions for up to 120 minutes. Tests carried out to AS 1530: Part 4 and BS 476: Part 20 and achieved a fire resistance level (FRL) of -/120/120 on the unpenetrated system. Insulation criteria will vary if measured on service penetrations. For floors, a -/120/90 system consists of a single batt coated on both faces and a -/120/120 system consists of double layer of coated batts. For walls, two batts are always required.

PROMASEAL^® Bulkhead Sealer can be supplied in 5kg container or as precoated batts measuring 1200mm x 600mm.

NOTE: PROMASEAL^®-A Acrylic Sealant to be liberally applied to all joints and contact points between the barrier and services, and the barrier on the substrate.